What are the characteristics and uses of aluminum alloy hand prototypes!

In the prototype model industry, metal prototype models are one of the major categories, which are divided into aluminum alloy prototype models, stainless steel prototype models, brass prototype models and other types. Let me introduce to you the characteristics and products of aluminum alloy prototypes. Usefulness!
The emergence of aluminum alloy prototype models is a better way to save costs. Many companies do not look at the market and regardless of experience, they directly open molds for production, or directly do small batch machining production. If the product design is not verified, most of them will cause problems. In order to reduce the cost loss, if you can do prototype verification first and find product problems, you can save a lot of unnecessary cost and waste. In fact, it will not cost much to produce an aluminum alloy model for testing first. It was difficult to produce before, but Nowadays, with three-axis, four-axis, and five-axis CNC processing equipment, it is basically very fast to produce any aluminum alloy model, so its characteristics are to save factory manufacturing costs, reduce unnecessary losses, and speed up product launch time.

Aluminum alloy prototype models are generally used in aerospace, automotive parts, industrial machinery, chemical machinery, automated machinery, automated robots, drones, agriculture, medical, ships and other industries. With the rapid development of society today, their uses are very wide. of.
Aluminum alloy prototype model manufacturing is divided into the following steps.
1. Programming + design. Based on the product design drawings provided by the customer, we write the program. If there is no design drawing, we will manually measure and then machine test.
2. Use a five-axis or three-axis CNC machine to process, input the program written by the programmer into the CNC processing equipment, and let the equipment process the prototype first.
3. Grinding + oxidation or powder spraying or painting. After the product comes out of the five-axis CNC machine, there will be many defects, such as burrs, burrs, irregularities and bifurcation, etc. This requires us to manually polish, and some Customers will need us to spray paint and apply bright colors on UV.
4. If there are other accessories, they need to be pre-assembled and then packaged beautifully.